ProCurve 2610-PWR Technické informace stáhnout pdf (Strana 132)

100

101

Spanning-Tree Operation

802.1D Spanning-Tree Protocol (STP)

Use this field to enable spanning tree.

Read-Only Fields

Figure 5-7. Enabling Spanning-Tree Operation

6. If the remaining STP parameter settings are adequate for your network,

go to step 10.

7. Use

[Tab] or the arrow keys to select the next parameter you want to

change, then type in the new value or press the Space Bar to select a value.

(If you need information on STP parameters, press

[Enter] to select the

Actions line, then press

H to get help.)

8. Repeat step 7 for each additional parameter you want to change.

Note: For information on the Mode parameter, see “STP Fast Mode” on

page 5-30.

9. When you are finished editing parameters, press

[Enter] to return to the

Actions line.

10. Press

[S] to save the currently displayed STP parameter settings. You will

then see the “Switch Configuration Menu” with an asterisk (

*) at the

Spanning Tree Operation line, indicating that you must reboot the switch

before the Protocol Version change (step 5) takes effect.

5-24

1 2 ... 127 128 129 130 131 132 133 134 135 136 137 ... 363 364

Komentáře k této Příručce

Žádné komentáře

ProCurve 2610-PWR Technické informace Strana 132

Komentáře k této Příručce

Související produkty a manuály pro Software ProCurve 2610-PWR