ProCurve 6400cl Uživatelská příručka stáhnout pdf (Strana 73)

100

101

Static Virtual LANs (VLANs)

Configuring VLANs

Figure 2-20. Example of “Show VLAN” for a Specific Static VLAN

Show VLAN lists this

data when GVRP is

enabled and at least

one port on the switch

has dynamically

joined the designated

VLAN.

Figure 2-21. Example of “Show VLAN” for a Specific Dynamic VLAN

Changing the Number of VLANs Allowed on the Switch. In the default

VLAN configuration, the switch allows a maximum of 8 VLANs. You can

specify any value from 1 to 256.

Syntax: max-vlans < 1-256 >

Specifies the maximum number of VLANs to allow. (If GVRP

is enabled, this setting includes any dynamic VLANs on the

switch.) As part of implementing a new setting, you must

execute a write memory command (to save the new value to the

startup-config file) and then reboot the switch.

Note: If multiple VLANs exist on the switch, you cannot reset

the maximum number of VLANs to a value smaller than the

current number of VLANs.

2-33

1 2 ... 68 69 70 71 72 73 74 75 76 77 78 ... 717 718

Komentáře k této Příručce

Žádné komentáře

ProCurve 6400cl Uživatelská příručka Strana 73

Komentáře k této Příručce

Související produkty a manuály pro Síťové přepínače ProCurve 6400cl