ProCurve 8200zl Uživatelská příručka stáhnout pdf (Strana 88)

PIM-DM (Dense Mode)

Displaying PIM Data and Configuration Settings

Syntax: show ip pim [interface [< vid >]]

Displays the current configuration for the specified VLAN

(PIM interface). Refer to table 3-1, below.

ProCurve(config)# show ip pim interface 29

PIM Interface

VLAN : 29

IP Address : 10.29.30.1

Mode : dense

Hello Interval (sec)

Hello Delay (sec)

: 30

: 5

Graft Retry Interval(sec) : 3

Max Graft Retries : 2

Override Interval (msec) : 2500

Propagation Delay (msec) : 500

SR TTL Threshold : 2

Lan Prune Delay

Lan Delay Enabled

State Refresh Capable

: Yes

: No

Figure 3-12. Example Output for Routing Switch “#1” in Figure 3-4 on Page 3-20

Table 3-1. PIM Interface Configuration Settings

Field Default Control Command

VLAN n/a vlan < vid > ip pim-dense

IP n/a vlan < vid > ip pim-dense < any | ip-addr >

Mode dense PIM-Dense or PIM-Sparse

Hello Interval (sec) 30 ip pim-dense hello interval < 5 - 30 >

Hello Hold Time 105 The routing switch computes this value from the current “Hello

Interval” and includes it in the “Hello” packets the routing

switch sends to neighbor routers. Neighbor routers use this

value to determine how long to wait for another Hello packet

from the routing switch. Refer to the description of the Hello

Interval on page 3-15.

Hello Delay 5 vlan < vid > ip pim-dense hello delay < 0 - 5 >

Graft Retry Interval

(sec)

3 vlan < vid > ip pim-dense graft-retry-interval < 1 - 10 >

Max Graft Retries 2 vlan < vid > ip pim-dense graft-retries < 1 - 10 >

3-30

1 2 ... 83 84 85 86 87 88 89 90 91 92 93 ... 359 360

Komentáře k této Příručce

Žádné komentáře

ProCurve 8200zl Uživatelská příručka Strana 88

Komentáře k této Příručce

Související produkty a manuály pro Síťové přepínače ProCurve 8200zl