ProCurve 8200zl Uživatelská příručka stáhnout pdf (Strana 91)

100

101

PIM-DM (Dense Mode)

Displaying PIM Data and Configuration Settings

DownStream Interfaces:

– VLAN: Lists the VID of the destination VLAN on the next-

hop multicast router.

– Prune Reason: Identifies the reason for pruning the flow to the

indicated VLAN:

• Prune: A neighbor multicast router has sent a prune

request.

• Assert: Another multicast router connected to the

same VLAN has been elected to provide the path for

the specified multicast group traffic.

• Other: Used where the VLAN is in the pruned state

for any reason other than the above two reasons

(such as no neighbors exist and no directly con-

nected hosts have done joins).

ProCurve(config)# show ip pim mroute 239.255.255.1 10.27.30.2

PIM Route Entry

Group Address : 239.255.255.1

Source Address : 10.27.30.2

Source Mask : 255.255.255.0

Metric : 3

Metric Pref : 120

Assert Timer : 0

DownStream Interfaces

This example displays the MRT

VLAN Prune Reason

data on the first of the two

---- ------------

multicast groups shown in figure

28 prune

3-13 on page 3-32.

Figure 3-14. Example From Routing Switch “#1” in Figure 3-4 on Page 3-20

Showing a Multicast Group from a Directly Connected Source

3-33

1 2 ... 86 87 88 89 90 91 92 93 94 95 96 ... 359 360

Komentáře k této Příručce

Žádné komentáře

ProCurve 8200zl Uživatelská příručka Strana 91

Komentáře k této Příručce

Související produkty a manuály pro Síťové přepínače ProCurve 8200zl